Back
Communication / gateways
KNX USB data interface
rail mounting device, 2 rail units
The USB data interface enables the coupling of a PC for the addressing, programming and diagnoses of KNX components. The power is fully supplied by the connected PC via the USB interface. This means that the USB data interface is no longer connected for the KNX if the USB cable is not plugged in. The device is only programmed locally with a physical address via the connected PC and therefore does not have a programming button or programming LED. The firmware of the USB data interface can be updated via a PC and is therefore safeguarded for future standards.
Note: The USB data interface is supported by ETS 3 software from version “a” upwards and by the PC operating systems Windows XP and Windows 7.
Connection: The connection to the KNX is carried out with the aid of the bus connection block. The USB connection is carried out with a certified USB cable (1 x B plug required) with a max. length of 16.40 ft (5 m).
The USB data interface enables the coupling of a PC for the addressing, programming and diagnoses of KNX components. The power is fully supplied by the connected PC via the USB interface. This means that the USB data interface is no longer connected for the KNX if the USB cable is not plugged in. The device is only programmed locally with a physical address via the connected PC and therefore does not have a programming button or programming LED. The firmware of the USB data interface can be updated via a PC and is therefore safeguarded for future standards.
Note: The USB data interface is supported by ETS 3 software from version “a” upwards and by the PC operating systems Windows XP and Windows 7.
Connection: The connection to the KNX is carried out with the aid of the bus connection block. The USB connection is carried out with a certified USB cable (1 x B plug required) with a max. length of 16.40 ft (5 m).
-
Product information & Downloads
Reference number 2130 USB REG-01
-
Technical data
KNX medium: NaV Power supply: via USB port of the PC Connection Connection, KNX: connection terminal USB port: USB port, type B Transfer rate: 9600 Baud Transmission protocol: compatible with USB 1.1/2.0 Length of USB cable: max. 16.4 ft Ambient temperature: +23 ... +number,0} °F Storing temperature: −13 ... +number,0} °F Protection class: II Mounting width: 1.42 in (2 rail units)
Back
Communication / gateways