Back
Devices for flush mounting / surface mounting

KNX presence detector mini

with integrated BCU
ETS product family: Physical sensors
Product type: Movement

Intended use
  • Requirement-oriented control of lighting, room thermostats and other electrical loads in interiors
  • Clamp mounting in suspended ceilings
  • Ceiling installation on fixed ceilings in flush box with dimensions according to DIN 49073 with flush mounting set (ref.-no.: PMM-UP-SET-WW)
  • Surface-mounted ceiling installation with surface mounting set (ref.-no.: PMM-AP-SET-WW)
 
Product characteristics
  • Integrated bus coupling unit
  • 3 PIR sensors
  • Detection field 360°
  • Integrated brightness sensor
  • Deployed as presence detector, motion detector, or for alert operation
  • Output functions: Switching, staircase lighting function, switching with forced position, value transmitter, light scene extension, operating mode setting for room temperature controller
  • Extension of the detection area by way of operating several devices as main unit or extension unit
  • Adjuster for manual adjustment of sensitivity
  • Status LED: Flashes during motion detection; depending on programming in normal operation or only during the walking test mode

Additional characteristics of "Universal" version:
  • Manual operation with IR remote control possible (ref.-no.: KNX PM FB IR)
  • 5 function blocks for motion detection each with 2 outputs
  • Function blocks switchable, e.g. for day/night operation
  • PIR sensors can be evaluated separately
  • Brightness sensor function with 3 limiting values
  • Light control with max. 3 channels, setpoint adjustment in operation, separate configuration of dimming-up, control and dimming-down phase
  • Light control can be combined with presence detector function
  • Temperature measurement

Presence detector function:
  • Detection of the smallest motions e.g. at a workplace for detecting the presence of persons
  • Switch on: Motion detection and brightness threshold not reached
  • Switch off: No motion in the detection field and run-on time elapsed or brightness threshold exceeded

Motion detector function:
  • Motion detection for passageways in buildings
  • Switch on: Motion detection and brightness threshold not reached
  • Switch off: No motion in the detection field and run-on time elapsed or brightness threshold exceeded
After reacting and switching on, the motion detection works independently of the brightness.

Signalling mode:
  • Brightness-independent detection of motions in the detection field
  • Switch on: After detection of an adjustable number of motions within the set monitoring period
  • Switch off: No motion in the detection field and run-on time elapsed
  • Product information & Downloads
  • Technical data
    • KNX medium:NaV
      Rated voltage KNX:DC 21 ... 32 V SELV
      Current consumption KNX:max. 10 mA
      Connection bus:terminal
      Protection class:III
      Ambient temperature:−13 ... +number,0} °F
      Stora/transport temperature:−13 ... +number,0} °F
      Relative humidity:10 ... 100 % (no condensation)
      Degree of protection:Degree of protection IP44 is ensured.
      Ceiling cut-out (Ø x D):1.73 x 1.38 in
      Dimensions (Ø x H):2.11 x 1.5 in (with design ring)
      Max. thickness of the suspended ceiling:approx. 0.98 in
      Installation depth:min. 1.38 in
      Distance between concrete ceiling and suspended ceiling:min. 0.79 in
      Design ring Ø inside:1.4 in
      Design ring Ø outside:2.11 in
      Aufbauhöhe Designring:0.07 in
      Aufbauhöhe Linse:0.22 in
      Motion detection
          Detection angle:360°
          Range:Ø approx. 12 m (mounting height 3 m)
      Brightness sensor
          Measuring range:10 ... 2,000 lx
          Accuracy (≤ 80 lx):± 10 lx
          Accuracy (> 80 lx):± 5 %
Back
Devices for flush mounting / surface mounting