Back
Devices for flush mounting / surface mounting

KNX brightness controller mini

with integrated BCU
ETS product family: Physical sensors
Product type: Bightness

Intended use
  • Measurement and control of lighting in interiors or in protected exteriors
  • Clamp mounting in suspended ceilings
  • Ceiling installation on fixed ceilings in flush box with dimensions according to DIN 49073 with flush mounting set (ref.-no.: PMM-UP-SET-WW)
  • Surface-mounted ceiling installation with surface mounting set (ref.-no.: PMM-AP-SET-WW)
 
Product characteristics
  • Asymmetrical measuring surface
  • Integrated bus coupling unit
  • Integrated brightness sensor
  • Brightness sensor function with 3 limiting values
  • Brightness limiting values (3 channels) with output functions switching, value transmitter and scene extension
  • Light control with max. 3 channels, setpoint adjustment in operation, separate configuration of dimming-up, control and dimming-down phase
  • On-off control possible for switch actuators
  • Power supply via bus voltage
  • Product information & Downloads
  • Technical data
    • KNX medium:TP
      Rated voltage KNX:DC 21 ... 32 V SELV
      Current consumption KNX:max. 10 mA
      Connection, KNX:connection terminal
      Protection class:III
      Ambient temperature:−13 ... +number,0} °F
      Stora/transport temperature:−13 ... +number,0} °F
      Relative humidity:10 ... 100 % (no condensation)
      Degree of protection:Degree of protection IP44 is ensured.
      Ceiling cut-out (Ø x D):1.73 x 1.38 in
      Dimensions (Ø x H):2.11 x 1.5 in (with design ring)
      Max. thickness of the suspended ceiling:approx. 0.98 in
      Installation depth:min. 1.38 in
      Distance between concrete ceiling and suspended ceiling:min. 0.79 in
      Design ring Ø inside:1.4 in
      Design ring Ø outside:2.11 in
      Aufbauhöhe Designring:0.07 in
      Aufbauhöhe Linse:0.22 in
      Brightness measurement
          Measuring range:10 ... 2,000 lx
          Accuracy (> 80 lx):± 5 %
          Accuracy (≤ 80 lx):± 10 lx
Back
Devices for flush mounting / surface mounting